Adaptive Modules
Site Last Updated: Tuesday, February 5, 2008
Bluetooth™ BlueWAVE PCB Serial Terminal - SMD Antenna
BlueWAVE PCB Serial Terminal provides a fully compliant wireless Bluetooth™ Class 1 Master and Slave function via a simple UART or RS232 interface.
BlueWAVE PCB Serial Terminal is aimed at OEM’s and systems integrators planning to deploy a point-to-point or point-to-multipoint Bluetooth™ solution into their product range. By choosing the BlueWAVE PCB Serial Terminal, we offer the opportunity to remove R&D costs, reduce time to market and eliminate development risk.
BlueWAVE PCB Serial Terminal - SMD Antenna product/data sheet*
BW-ST-C1-IA
Benefits
- Full Bluetooth™ Compatibility
- Zero Risk Route to Market Ready
- R&D Cost Elimination
- Acquisition options suitable for all volume bands
- Lowest cost ’all in’ Bluetooth™ Serial Solution
- Full Engineering Support
The BlueWAVE PCB Serial Terminal will provide instant wireless connectivity to any device supporting either a UART or RS232 interface. The BlueWAVE PCB Serial is compatible with all other device supporting Bluetooth™ SPP such as iPAQ™, Palm™, Laptops with integrated Bluetooth™, USB adaptors and cell phones etc.
The BlueWAVE PCB Serial Terminal is based on the pre-qualified Cambridge Silicon Radio BlueCORE 02 platform.
Features
- Fully Bluetooth™ Class 1 v1.1 SPP compatible
- Wireless range of over 100m (330ft)
- Integrates with RS232 or UART systems
- Small footprint
- Platform independent
- Supports baud rates from 2400 - 115200 baud
- Configurable Digital I/O
- Various low power sleep modes
- SMD PCB antenna connection for direct antenna connection or coax
How it works
The BlueWAVE PCB Serial Terminal encapsulates all of the Bluetooth™ protocols on a single chip, providing a simple serial interface to the host, therefore removing any need for software drivers or experience in developing wireless technology.
General Specification
| Supply Voltage (VCC) | : | 3.5V - 16V DC |
| Carrier Frequency | : | 2400MHz to 2483.5MHz (USA, Europe) |
| Modulation Method | : | GFSK, 1Mbps, 0.5BT Gaussian |
| Transmission Power | : | Class 1 (max 20dBm) |
| Hopping | : | 1600 hops/sec, 1MHz channel |
| Receiving Signal Range | : | -84 to -20dBm |
| Receiver IF Frequency | : | 1.5MHz centre frequency |
| Output Interface | : | EIA 232 (5V) 9 Way D Type |
| Operating Temperature | : | -20 ~ 75 degrees |
| Storage Temperature | : | -40 ~ 85 degrees |
| Humidity | : | 95% non-condensing |
| Compliant | : | Bluetooth™ Specification v1.1 |
| Baud Rate | : | 1200 - 115200baud |
| Operating Range | : | 100m (328 ft) |
| Dimensions | : | 37 x 27 (mm) |
| Antenna | : | GigaAnt Rufus Ceramic Antenna |
Sample Applications
BlueWAVE is being adopted by electronics manufacturers within a whole range of industry sectors to include:-
- Medical
- Automotive
- Telecoms
- Utility
- Industrial Control
- EPOS
- many more...
Development Kits
The BlueWAVE Development Kits allow for a complete technical evaluation of Bluetooth™ technology within your application with zero R&D. Backed up by worldclass technical support from Wireless Futures, you will see why we have over 400 OEM customers across the world, more...
Technical Support
As Adaptive Modules Ltd is a leading wireless development consultancy, we are able to offer a complimentary technical support package to our customers integrating the BlueWAVE products. This technical support will include telephone and email advice support@adaptivemodules.com.
Customisation
If the BlueWAVE product does not fit your requirements exactly, we are able to customise the solution to meet your needs. For more information on our customisation service, please contact us.
BlueWAVE PCB Serial Terminal - SMD Antenna product/data sheet*
* = You will need a copy of Adobe Acrobat to read this file. Download a free copy here.