Adaptive Modules

Site Last Updated: Tuesday, February 5, 2008

Nemo10 - Embedded Device Server Module with built-in UART

Nemo10

The Nemo10 is a cost-effective and easy-to-use single chip network enabler module for system integrators and manufacturers who need a way to rapidly make their devices network-ready at a minimal transition cost. The NEMO10 is designed for the integration into user devices by on board installation. On one end, it is connected to the Ethernet RJ45 connector on the board. Within the single-chip DIL package, the NEMO10 has its own TCP/IP-Ready microprocessor, UART for serial interface and built-in 10Base-T Ethernet controller that handle the entire communication between devices over the Ethernet.

Bundled with Serial/IP, COM Port redirector from Tactical Software, the NEMO10 supports reliable serial-TCP communication with users’ devices for existing users’ serial applications. The Windows-based configuration software, HelloDevice Manager, simplifies initial installation and management.

Hardware

  • 8-bit microprocessor
  • 32KB SRAM, 64KB EEPROM

External Interface pins

  • 24-pin Dual In Line Interface for UART, Ethernet, LED and power

Serial Interface

  • Built-in UART
  • Serial speeds 1200bps to 115bps
  • Flow control: Hardware RTS/CTS
  • Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
  • Parameters: Parity: None, Even, Odd, Data bits: 7,8 Stop bits 1,2

Network Interfaces

  • 10 Base-T Ethernet
  • Supports static and dynamic IP address

Protocols

  • ARP/IP/ICMP, TCP server and Telnet, DHCP client

Security

  • Password protection

Management

  • Telnet or HelloDevice Mana Serial Console

Power

  • 5V DC+- 10%, 60A5VDC