Adaptive Modules

Site Last Updated: Tuesday, February 5, 2008

Wireless Single Port Device Server - PS110W

PS110W

Features:

  • Connects legacy serial devices to 802.11b/g Wi-Fi or 10/100Base-T Ethernet network.
  • Supports surge protector for RS232 interface, up to 460Kbps speed
  • Flexible TCP/UDP host mode support: Multiple host connection/data transfer.
  • Powerful security support, 64/128-bit WEP, WPA/WPA2/802.11i , SSL (Secure Socket Layer), RC4.
  • System logging & port buffering..
  • Supports Dynamic DNS protocol for DSL connection to broadband Internet.
  • Configuration via Web, Telnet/SSH, Windows Utility or console.
  • Supports RFC 2217, Telnet COM Port Control Protocol

Specifications:

  PS110W PS210W
Serial Interface Single-port RJ45 connector 2-port RJ45 connector
Serial speeds 300bps to 460kbps
Flow Control: Hardware, Software
Signals:
  • RS232: Rx, Tx, RTS, CTS, DSR, DTR, DCD, GND
Surge protector equipped for each serial port
Network Interface 802.11b/g Wi-Fi
10/100 Base-T Ethernet with RJ45 Ethernet connector
Supports static and dynamic IP address
Protocols ARP, IP/ICMP, TCP, UDP,
Telnet/SSH
DNS, Dynamic DNS,HTTP, SMTP, DHCP,
SNMP v1 & v2, SSL v3
Serial Port Access protocol :
Telnet, TCP, UDP, SSL v3, RFC-2217
Ethernet modem Full AT command set support
Security 64/128-bit WEP, WPA/WPA2/802.11i
SSH, SSL, IP address filtering, HTTPS
Management Web
Console port
Telnet/SSH
HelloDevice ManagerTM software
O/S support: Windows 98/ME/NT/2000/XP
Logging & Buffering Versatile system logging support for all system events
Serial port data buffering
Firmware Upgrade using console, telnet/SSH and web
Diagnostic LED Power, Status, Ethernet, Wireless, Serial1 Power, Status, Ethernet, Wireless, Serial1, Serial2
Power 5VDC
Environmental Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 66°C
Humidity: 90% Non-condensing
Physical properties    
MTBF    
Certification FCC Part 15 Subpart B, Class A
EN61000-3-2, EN61000-3-3
EN60950-1
EN55022
EN55024
MIC
Warranty 5-year limited warranty