High-Flying 4G DTU with RS232 & RS485

Part Number : HF2411-EU

    £ 57.96 £ 57.96 57.96 GBP

    £ 57.96

    + VAT

    This combination does not exist.

    Add to Cart

    The HF2411 support LTE-TDD, LTE-FDD, WCDMA, TD-SCDMA, GPRS full network. 4G network support maximum download data rate 150Mbps, upload data rate 50Mbps.
    The HF2411 support TCPIP protocol, with its RS232/RS485 interface, it makes traditional UART device easy connecting to IOT.

    Overview of Characteristic


    ² Support RS232/RS485 to 2G/3G/4G Data Transmission, UART baud rate Up to 460800bps

    ² Supports Max 3 Channel TCP/UDP connections, Each Connection Supports 1400 Bytes of Data Cache

    ² Support Multiple Working Modes: Network Transparent Transmission Mode, HTTP Mode

    ² Support IOTService Tool, Remotely and Dynamically Modify Module Parameters

    ²  Support SMS AT Command Configuration

    ² Supports Registration Packet, Heartbeat Packet Function, and Packet Supports Combination of ICCID, IMEI, IMSI, Software Version, GPRS Connection Status.

    ² Support NTP

    ² Support Modbus TCP to Modbus RTU

    ² Support IOTBridge for Remote Control and Config

    ² Support IOTBridge Working Time Setting, For Example, Only Works From 10:00 to 10:30 to Save the Data Traffic

    ² Support UART, Network OTA Upgrade Firmware

    ² Size: 95 x 65 x 25mm

    ² 9~36VDC Wide Power Supply

    Basic Frequency96MHz
    Operating SystemFreeRTOS
    Protection8KV Isolation
    Transmit PowerLTE-TDD: Class 3(23dBm+1/-3dB) LTE-FDD: Class 3(23dBm±2dB) WCDMA: Class 3(24dBm+1/-3dB) TD-SCDMA: Class 3(24dBm+1/-3dB) GSM900: Class 4(33dBm±3dB) DCS1800: Class 1(30dBm±3dB) GSM900 8-PSK: Class E2(27dBm±3dB) DCS1800 8-PSK: Class E2(26dBm±3dB)
    Receive SensitivityFDD B1: -96dBm(10M) FDD B3: -96dBm(10M) FDD B5: -96dBm(10M) FDD B8: -96.5dBm(10M) TDD B38: -96dBm(10M) TDD B39: -97dBm(10M) TDD B40: -96.5dBm(10M) TDD B41: -96dBm(10M) WCDMA B1: -110dBm WCDMA B8: -111dBm TDSCDMA B34: -109dBm TDSCDMA B39: -109dBm GSM 900M: -109dBm GSM 1800M: -109dBm
    Port Number1
    Interface StandardRS232: DB9 RS485: 5.08mm connector
    Stop Bit1,2
    Check BitNone,Even,Odd
    Baud RateTTL:1200 bps~460800 bps
    Flow ControlNo Flow control Half-Duplex(RS485) Hardware RTS/CTS、DSR/DTR(RS232)
    Size95mm x 65mm x 25mm
    Input Voltage9~36VDC
    Warranty1 years
    Work Temp.-40 ~ 85°C
    Storage Temp.-45 ~ 105°C

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products